Street Track Racing Drifting
Fitment Location: Rear
Diameter: 286mm
Original Height: 78.6mm
Original Thickness: 16mm
Minimum Thickness: 13.9mm
Centre Hole: 70mm
Number of Bolt/Stud Holes: 5
RDA Slotted and Dimpled Brake Disc Rotors provide a cost effective solution to improve the stopping performance of any make and model of vehicle. RDA Slotted and Dimpled Brake Disc Rotors provide a performance upgrade for Track Days, Racing and Drifting or a cosmetic upgrade for Streed Driven vehicles.
- Increased "initial-bite" due to "deglazing" of the Brake Pads from the Slots and Dimples
- Increased dissipation of water, dust and road grime from the contact area of your Brake Disc Rotors and Brake Pads
- Slots and Dimples prevent “out-gassing” (gases produced from the Brake Pad bonding agent, in high heat conditions i.e. Track Days, Racing Drifting) directing the gases away from the Brake Pad and Brake Disc Rotor contact surface, which drastically increases "initial-bite" from the Brake Pads Direct fitment, without the need for modifications
- Black anti-rust/passivation coating covering the entire disc rotor allows instant safe braking after install and increases surface rust resistance on areas away from the braking surface of the disc rotor
- Ground finish on the brake surface to enhance initial brake performance
- Heat tempered to ensure longer life in the metal composition and structure
- ECE 11 R90 APPROVED for vehicles within ECE with all RDA Disc Rotors made to the same exacting standards
Holden
Holden Adventura VZ - 2005-2006
Holden Adventura VZ (VYII) - 2004-2005
Holden Adventura VYII - 2003-2004
Holden Berlina VZ - 2004-2007
Holden Berlina VY, VYII - 2002-2004
Holden Berlina VX, VXII - 2000-2002
Holden Calais VZ - 2004-2007
Holden Calais VY, VYII - 2002-2004
Holden Calais VX, VXII - 2000-2002
Holden Calais VT, VTII - 1997-2000
Holden Caprice WL - 2004-2006
Holden Caprice WK - 2003-2004
Holden Caprice WH, WHII - 1999-2003
Holden Commodore VZ - 2004-2007:
- All V6 Models
- SV8
- SS
Holden Commodore VY, VYII - 2002-2004
Holden Commodore VX, VXII - 2000-2002
Holden Commodore VT, VTII - 1997-2000
Holden Crewman VZ - 2005-2007:
- No Badge
- S
- Storm S
- Cross 6
- SS
- Thunder SS
- Cross 8
Holden Crewman VZ (VYII) - 2004-2005
Holden Crewman VYII - 2003-2004
Holden Monaro VZ - 2004-2005
Holden Monaro V2, V2 Series II, V2 Series III - 2001-2004
Holden Statesman WL - 2004-2006
Holden Statesman WK - 2003-2004
Holden Statesman WH, WHII - 1999-2003:
Holden Ute VZ - 2004-2007
Holden Ute VY, VYII - 2002-2004
Holden Ute VU, VUII - 2000-2002
It is imperative that correct measurements are referenced to ensure correct application.
It is imperative for competition use a complete description of vehicle application is discussed to ensure maximum benefit.
Fitment Location: Rear
Diameter: 286mm
Original Height: 78.6mm
Original Thickness: 16mm
Minimum Thickness: 13.9mm
Centre Hole: 70mm
Number of Bolt/Stud Holes: 5
RDA Slotted and Dimpled Brake Disc Rotors provide a cost effective solution to improve the stopping performance of any make and model of vehicle. RDA Slotted and Dimpled Brake Disc Rotors provide a performance upgrade for Track Days, Racing and Drifting or a cosmetic upgrade for Streed Driven vehicles.
- Increased "initial-bite" due to "deglazing" of the Brake Pads from the Slots and Dimples
- Increased dissipation of water, dust and road grime from the contact area of your Brake Disc Rotors and Brake Pads
- Slots and Dimples prevent “out-gassing” (gases produced from the Brake Pad bonding agent, in high heat conditions i.e. Track Days, Racing Drifting) directing the gases away from the Brake Pad and Brake Disc Rotor contact surface, which drastically increases "initial-bite" from the Brake Pads Direct fitment, without the need for modifications
- Black anti-rust/passivation coating covering the entire disc rotor allows instant safe braking after install and increases surface rust resistance on areas away from the braking surface of the disc rotor
- Ground finish on the brake surface to enhance initial brake performance
- Heat tempered to ensure longer life in the metal composition and structure
- ECE 11 R90 APPROVED for vehicles within ECE with all RDA Disc Rotors made to the same exacting standards
Holden
Holden Adventura VZ - 2005-2006
Holden Adventura VZ (VYII) - 2004-2005
Holden Adventura VYII - 2003-2004
Holden Berlina VZ - 2004-2007
Holden Berlina VY, VYII - 2002-2004
Holden Berlina VX, VXII - 2000-2002
Holden Calais VZ - 2004-2007
Holden Calais VY, VYII - 2002-2004
Holden Calais VX, VXII - 2000-2002
Holden Calais VT, VTII - 1997-2000
Holden Caprice WL - 2004-2006
Holden Caprice WK - 2003-2004
Holden Caprice WH, WHII - 1999-2003
Holden Commodore VZ - 2004-2007:
- All V6 Models
- SV8
- SS
Holden Commodore VY, VYII - 2002-2004
Holden Commodore VX, VXII - 2000-2002
Holden Commodore VT, VTII - 1997-2000
Holden Crewman VZ - 2005-2007:
- No Badge
- S
- Storm S
- Cross 6
- SS
- Thunder SS
- Cross 8
Holden Crewman VZ (VYII) - 2004-2005
Holden Crewman VYII - 2003-2004
Holden Monaro VZ - 2004-2005
Holden Monaro V2, V2 Series II, V2 Series III - 2001-2004
Holden Statesman WL - 2004-2006
Holden Statesman WK - 2003-2004
Holden Statesman WH, WHII - 1999-2003:
Holden Ute VZ - 2004-2007
Holden Ute VY, VYII - 2002-2004
Holden Ute VU, VUII - 2000-2002
It is imperative that correct measurements are referenced to ensure correct application.
It is imperative for competition use a complete description of vehicle application is discussed to ensure maximum benefit.