RDA Slotted and Dimpled Brake Disc Rotors provide a cost effective solution to improve the stopping performance of any vehicle, while also providing a cosmetic upgrade.
Diameter: 332mm
Original Height: 72.1mm
Original Thickness: 15.6mm
Minimum Thickness: 13.5mm
Centre Hole: 93mm
Number of Bolt/Stud Holes: 6
Ford Everest UA - 2015-2020
Ford Ranger PXIII - 2018-2020
Please use the referenced dimensions provided to confirm this product is correct for your vehicle. If you are unsure, please do not hesitate to contact us via phone on 03 5901 9996 or via email at richmondbrakeandclutch@hotmail.com
If you plan to use your vehicle for heavy payloads, towing, off-roading, performance driving, drag racing, track days, circuit racing or drifting please contact us to discuss the best product for your application.
- Direct fitment for all vehicle applications.
- Increased initial-bite due to deglazing of the Brake Pads from the Slots and Dimples.
- Increased dissipation of water, dust and road grime from the contact area of your Brake Disc Rotors and Brake Pads.
- Slots and Dimples prevent out-gassing (gases produced from the Brake Pad bonding agent, in high heat conditions, i.e. Track Days, Racing and Drifting) directing the gases away from the Brake Pad and Brake Disc Rotor contact surface, drastically increasing initial-bite from the Brake Pads.
- Black anti-rust/passivation coating covering the entire Disc Rotor allows instant safe braking after installation and increases surface rust resistance on areas away from the braking surface of the Disc Rotor.
- Ground finish on the brake surface to enhance initial brake performance.
- Heat tempered to ensure longer life in the metal composition and structure.
- ECE 11 R90 APPROVED for vehicles within ECE with all RDA Disc Rotors made to the same exacting standards.
Diameter: 332mm
Original Height: 72.1mm
Original Thickness: 15.6mm
Minimum Thickness: 13.5mm
Centre Hole: 93mm
Number of Bolt/Stud Holes: 6
Vehicle Fitment
FordFord Everest UA - 2015-2020
Ford Ranger PXIII - 2018-2020
Please use the referenced dimensions provided to confirm this product is correct for your vehicle. If you are unsure, please do not hesitate to contact us via phone on 03 5901 9996 or via email at richmondbrakeandclutch@hotmail.com
If you plan to use your vehicle for heavy payloads, towing, off-roading, performance driving, drag racing, track days, circuit racing or drifting please contact us to discuss the best product for your application.